Question: How Long Does It Take For A Well Water Test?

How can you tell if your well water is bad?

4.

Something Looks, Smells, or Tastes StrangeReddish/brown: Iron or manganese.

May cause staining.Blue/green: Copper.

Corrosive water may be leaching from pipes.Yellow: Suspended organic particles.

Common in shallow wells.White/cloudy: High turbidity.

Large amount of fine inorganic and organic particles..

How often should a well be cleaned?

every ten yearsWater wells should also be inspected annually for obvious signs of damage or contamination. Be sure the area within 100 feet around the well is clear of debris or items that might pollute the water supply. Get the well professionally inspected by a water well contractor every ten years.

How can I test my well water at home?

Often county health departments will help you test for bacteria or nitrates. If not, you can have your water tested by a state certified laboratory. You can find one in your area by calling the Safe Drinking Water Hotline at 800-426-4791 or visiting www.epa.gov/safewater/labs.

How can I test water quality at home without a kit?

You can do a simple pH water test without a pH testing kit. A water pH test kit typically contains pH test strips, indicator drops, and a pH test meter. If you do not have a kit, purchase a fresh red cabbage and a bottle of distilled water to make a pH indicator.

How often should I have my well water tested?

When should I have my well tested? You should have your well tested once a year for total coliform bacteria, nitrates, total dissolved solids, and pH levels. If you suspect other contaminants, you should test for those as well. However, spend time identifying potential problems first, as these tests can be expensive.

Can you get sick from drinking well water?

Health Risks Symptoms include diarrhea, vomiting, cramps, nausea, headaches, fever, fatigue, and even death sometimes. Infants, children, elderly people, and people with weakened immune systems are more likely to get sick or die from disease-causing microorganisms in drinking water.

How much does it cost to have your well water tested?

Costs can vary depending on the number and type of tests you request. Typical tests range from $25-$400.

How do you tell if your well is contaminated?

Smell Signs to Look Out For One of the easiest ways to determine if your water is contaminated is by the smell of rotten eggs. A rotten egg smell points to sulfur bacteria or hydrogen sulfide gas in your water. Sulfur bacteria are naturally occurring.

How do I get my well water tested?

You can get water testing supplies (sample bottles) and shipping information from your local Community Health Centre. Testing for municipalities and private home owners is done through the Provincial Laboratory of Public Health and Alberta Centre for Toxicology.

What’s involved in a well inspection?

During an inspection, the inspector will test the water system and check it for volume and pressure. They will look at the well to make sure it is properly constructed and compliant and they will run water tests for things like bacteria, nitrate, and arsenic, depending on county requirements.

Does well water need to be filtered?

Well water almost always requires some softening and filtration to make it ideal for drinking, cooking, and cleaning. Here are several other things you should know …

Can well water go bad?

Although properly stored public-supply water should have an indefinite shelf life, replace it every 6 to 12 months for best taste. If the water you are storing comes from a private well, spring, or other untested source, purify it before storage to kill pathogens (see below).